Free 300-430 sample questions for the Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) exam. No account required: study at your own pace.
Looking for more? Click here to get the full PDF with 245+ practice questions for $10 for offline study and deeper preparation.
Question 1
What is an indication of having multiple wireless controllers within the same CAPWAP multicast group?
A. Multicast packets are rate-limited to 128 kbps
B. Multicast traffic is increased throughout the network
C. ACL filtering are used on the first hop router on all VLANs
D. CAPWAP packets are fragmented
Show Answer
Correct Answer:
B. Multicast traffic is increased throughout the network
Question 2
An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?
A. scheduled report
B. radio performance
C. client status
D. software
Show Answer
Correct Answer:
B. radio performance
Question 3
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
A. Cisco Hyperlocation Module
B. Wireless Intrusion Prevention System
C. Cisco Connected Mobile Experiences
D. Cisco Mobility Services Engine
Show Answer
Correct Answer:
C. Cisco Connected Mobile Experiences
Question 4
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
A. split tunneling
B. SE-connect
C. FlexConnect
D. AP failover priority
Show Answer
Correct Answer:
A. split tunneling
Question 5
A customer is concerned that their wireless network is detecting spurious threats from channels that are not being used by their wireless infrastructure. Which two technologies must they deploy? (Choose two.)
A. FlexConnect mode
B. monitor mode
C. sniffer mode with no submode
D. local mode with WIPS submode
E. rogue detector mode
Show Answer
Correct Answer:
D. local mode with WIPS submode
E. rogue detector mode
Question 6
A company wants to utilize the wireless network to push videos to wireless clients. An engineer has been hired to configure a Cisco WLC to notify users when it cannot provide a video stream while using the Multicast Direct Feature. Which setting must be enabled for this functionality?
A. SNMP Trap Log
B. Northbound Notification
C. Message of the Day
D. Session Announcement State
Show Answer
Correct Answer:
D. Session Announcement State
Question 7
A network engineer is implementing BYOD on a wireless network. Based on the customer requirements, a dual SSID approach must be taken. Which two advanced WLAN configurations must be performed? (Choose two.)
A. Set NAC State to Radius NAC
B. Set Allow AAA Override to Enabled
C. Set DHCP Addr. Assignment to Required
D. Select DHCP Profiling
E. Select Enable Session Timeout
Show Answer
Correct Answer:
A. Set NAC State to Radius NAC
B. Set Allow AAA Override to Enabled
Question 8
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
A. 10 seconds
B. 15 seconds
C. 30 seconds
D. 60 seconds
Show Answer
Correct Answer:
B. 15 seconds
Question 9
An engineer added more APs to newly renovated areas in building. The engineer is now receiving Out-of-Sync alarms on Cisco Prime Infrastructure. Which two actions resolve this issue? (Choose two.)
A. Manually synchronize from Cisco Prime Infrastructure
B. Manually synchronize from MSE
C. Enable automatic synchronization on Cisco Prime Infrastructure
D. Enable automatic synchronization on MSE
E. Add new APs to maps on Cisco Prime Infrastructure
Show Answer
Correct Answer:
A. Manually synchronize from Cisco Prime Infrastructure
E. Add new APs to maps on Cisco Prime Infrastructure
Question 10
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
A. analytics
B. connect and engage
C. presence
D. detect and locate
Show Answer
Correct Answer:
C. presence
Question 11
An engineer is using Cisco Prime Infrastructure reporting to monitor the state of security on the WLAN. Which output is produced when the Adaptive wIPS Top 10 AP report is run?
A. last 10 wIPS events from monitor mode APs
B. last 10 wIPS events from sniffer mode APs
C. last of 10 sniffer mode APs with the most wIPS events
D. last of 10 monitor mode APs with the most wIPS events
Show Answer
Correct Answer:
A. last 10 wIPS events from monitor mode APs
Question 12
You are seeing an excessive number of rogue AP alarms in Cisco Prime Infrastructure. All these alarms have a severity level of Minor. Which two actions must be taken to make more efficient use of rogue AP alarms? (Choose two.)
A. Create and install configuration templates to establish rogue rules that use specific criteria to declare rogue APs as Friendly rogues
B. Disable rogue detection on the infrastructure APs that are detecting the rogue APs
C. Create and install a configuration template that modifies the minimum rogue detection RSSI of the controller to a stronger value
D. Delete the alarms. They do not return even if the same rogue AP is detected again
E. Clear the alarms. They do not return even if the same rogue AP is detected again
Show Answer
Correct Answer:
A. Create and install configuration templates to establish rogue rules that use specific criteria to declare rogue APs as Friendly rogues
C. Create and install a configuration template that modifies the minimum rogue detection RSSI of the controller to a stronger value
Question 13
What must be configured on ISE version 2.1 BYOD when using Single SSID?
A. open authentication
B. 802.1x
C. no authentication
D. WPA2
Show Answer
Correct Answer:
A. open authentication
Question 14
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)
A. CSV
B. PDF
C. XLS
D. DOC
E. plain text
Show Answer
Correct Answer:
A. CSV
B. PDF
Question 15
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9. Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
A. Permit 0.0.0.0 0.0.0.0 any DNS any
B. Permit 0.0.0.0 0.0.0.0 UDP DNS any
C. Permit 0.0.0.0 0.0.0.0 UDP any DNS
D. Permit any any any
E. Permit 0.0.0.0 0.0.0.0 UDP any any
Show Answer
Correct Answer:
C. Permit 0.0.0.0 0.0.0.0 UDP any DNS
E. Permit 0.0.0.0 0.0.0.0 UDP any any
Question 16
An engineer is concerned that a wireless attack is causing client connectivity issues. Which Cisco Prime Infrastructure report does the engineer run to determine if the user was in an area afflicted by a large number of attacks?
A. NetFlow v7
B. New Rogue APs
C. AVC Troubleshooting
D. Adaptive wIPS Top 10 APs
Show Answer
Correct Answer:
D. Adaptive wIPS Top 10 APs
Question 17
As part of a PCI audit, an engineer is gathering information on a Cisco Unified Wireless Network environment. The report must include any security weaknesses in the system. Where does the engineer find the related information?
A. security team network scan results from last year
B. Security tab on Cisco wireless LAN controllers
C. security interference results on Cisco Prime Infrastructure
D. security index results on Cisco Prime Infrastructure
Show Answer
Correct Answer:
D. security index results on Cisco Prime Infrastructure
Question 18
An engineer attempts to troubleshoot client connectivity issues in Cisco Prime Infrastructure. The Cisco Prime Infrastructure GUI is performing as expected, but the client detail information that is displayed is not current. The displayed client state and connected AP are up to 5 minutes old. Which action resolves this issue?
A. Change the data retention settings to 5 seconds
B. Use a different browser to access the web interface
C. Enable client Assoc/Disassoc and Auth/Deauth SNMP traps on the controller
D. Optimize the Cisco Prime Infrastructure database
Show Answer
Correct Answer:
C. Enable client Assoc/Disassoc and Auth/Deauth SNMP traps on the controller
Question 19
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
A. EAP-PEAP with 802.1x port authentication
B. EAP-TLS with 802.1x port authentication
C. EAP-FAST with CAPWAP DTLS + port authentication
D. EAP-FAST with CAPWAP DTLS
Show Answer
Correct Answer:
D. EAP-FAST with CAPWAP DTLS
Question 20
An engineer set up a VoWLAN with QoS on the WLC and a class map on the switch, but the markings are not being preserved correctly in the end-to-end traffic flow. Which two configurations on the wired network ensure end-to-end QoS? (Choose two.)
A. trust boundaries
B. access lists
C. policy maps
D. QoS licenses
E. NetFlow
Show Answer
Correct Answer:
A. trust boundaries
C. policy maps
Aced these? Get the Full Exam
Download the complete 300-430 study bundle with 245+ questions in a single printable PDF.