Free HPE6-A47 Sample Questions — Designing Aruba Solutions

A customer has a small office building that needs approximately 32 APs. The solution must support basic rogue AP detection and provide a stateful firewall with role-based policies. The customer would like the simplest, most cost-effective deployment that meets their needs. What should the architect recommend?

• A. Aruba remote APs
• B. Aruba campus APs and a Virtual Mobility Controller
• C. Aruba Instant APs
• D. Aruba campus APs and an Aruba 7005 Mobility Controller

A customer has very high availability requirements for wireless services. The architect plans to implement clustering on several Aruba Mobility Controllers (MCs). Which benefit of this feature should the architect explain?

• A. Clustering provides wireless client load balancing and seamless failover for client sessions
• B. Clustering provides high stability because one MC is active for all sessions and one is standby for all sessions
• C. Clustering enables an AP with a failed MC to operate on its own briefly to ensure seamless connectivity
• D. Clustering enables an AP with a failed MC to reconnect to a new AP after a short bootstrap

A financial institution has an Aruba wireless system. Each floor is 19 meters by 23 meters (200 feet by 250 feet) and has 20 APs. The organization now requires dedicated Air Monitors (AMs). About how many AMs should the architect recommend per floor?

• A. about 1 or 2 per floor
• B. about 3 to 5 per floor
• C. about 10 to 12 per floor
• D. about 16 to 20 per floor

An architect proposes an Aruba solution with a hardware Mobility Master (MM) to a customer. The customer has a disaster recovery site which is connected to the main site at Layer 3. The customer requires the MM to remain available in case of a total site failure. Which plan meets the customer requirements?

• A. Deploy a hardware MM to the disaster recovery site and set up VRRP between them
• B. Deploy a hardware MM to the disaster recovery site and set its IP address as the standby master for MCs
• C. Deploy the virtual MM (VMM) to the disaster recovery site and set the VMM IP address to the same address as the hardware MM
• D. Deploy the virtual MM (VMM) to the disaster recovery site and configure clustering on the hardware and software appliances

What should an architect use as a guideline to determine when to define another VLAN for wireless devices?

• A. the WLAN or SSID, with a different VLAN for each SSID
• B. the AP deployment, with a different VLAN for each AP that is deployed
• C. the number of devices, with a different VLAN for each 250 devices
• D. the employee roles, with a different VLAN for each role or department