Free MB-335 Sample Questions — Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert

You are the production supervisor at a chemical processing plant. You must track attributes for each batch of chemicals. Automated quality orders must be generated when a batch order for these chemicals is reported as finished. You need to ensure that the values of attributes are updated and tracked. What three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Create attribute types
• B. Create a test instrument for each attribute
• C. Set up batch attributes
• D. Assign the attributes to the appropriate test on the test group
• E. Assign the attributes to the chemicals

A company is implementing Dynamics 365 Supply Chain Management in their manufacturing environment. The manufacturing process uses formulas to direct material consumption on the batch orders. During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list. You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes. What are two possible ways to achieve this goal? Each correct answer presents a complete solution, NOTE: Each correct selection is worth one point.

• A. Set the flushing principle on each formula line based on consumption method for the line
• B. Leave the flushing principle blank on formula lines and set default flushing principle on the items based on consumption method for the item
• C. Leave the flushing principle blank on formula lines and set resource consumption to direct flushing principle of materials based on consumption method for the line
• D. Leave the flushing principle blank on formula lines and set the default start value to Always for Automatic Bill of Material Consumption

A manufacturer is implementing Dynamics 365 Supply Chain Management with warehouse management processes (WMS). Warehouse workers use hand-held devices to pick and stage batch-tracked products for production. The warehouse manager requires that products are removed from on-hand inventory and consumed when they are picked and staged for production. You need to remove the products from on-hand inventory. What should you configure?

• A. mobile device menu item, start production order
• B. flushing principle, available at location
• C. flushing principle, start
• D. manufacturing execution, job card device

A vendor plans to supply replacements for a product that they manufactured. The cost associated with manufacturing most components of the replacement product differ from costs associated with the original product. You need to plan for the new cost of the item in determining the sales price. Which costing version explosion mode should you use?

• A. According to BOM line type
• B. Single level
• C. Multilevel
• D. Make to Order

A company uses Dynamics 365 Supply Chain Management for Process manufacturing. You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product. One order is scheduled to run the week after another order. You need to optimize the planned production orders. What should you do?

• A. In Planned orders, combine the production orders
• B. Rerun master planning. Select the dynamic plan with a coverage time fence of two weeks
• C. Firm the orders
• D. Rerun master planning. Select the static plan with a coverage time fence of two weeks

A company uses Dynamics 365 Supply Chain Management. Due to supply chain issues, the bill of materials (BOM) for finished goods requires substitute products and subcomponent redesign. The engineering team must update the product designs and release to the companies. The products already exist and are not currently configured for version control on transactions. You need to configure the solution. Which three actions should you perform? Each correct answer presents a partial solution. NOTE: Each correct selection is worth one point.

• A. Enable version tracking on transactions
• B. Run the Convert to engineering product wizard
• C. Use the automation solution template
• D. Enable engineering change management
• E. Enable change management on existing products

A company produces rubber hose. Discrete orders accounts for raw material scrap. The scrap is reported through inventory movement journals. The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced. You need to account for material lost during startup. What should you do?

• A. Enter the consumption amount on the line to match the actual amount used
• B. Do a case study for the scrap items and enter the average amount of scrap as separate line items on the Bill of materials
• C. Enter the amount of scrap that is consumed as constant scrap in the Bill of materials
• D. Enter the amount of scrap that is consumed as variable scrap in the Bill of materials

A customer produces light projection toys for holiday decorations throughout the year. The production process creates the projection toy at the following work cells: stands, main assembly, electric, visuals, and packaging. Vendors must create templates for each toy they produce each season. They must manage the transfer of templates to the warehouse. Each transfer for each vendor must use the same purchase agreement. You need to configure the subcontracted transfer activity. What should you do?

• A. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the vendor
• B. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse
• C. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse
• D. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements inside the vendor ID of the vendor
• E. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the warehouse
• F. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse

You use the master planning module for Dynamics 365 Supply Chain Management. Planned production orders have been created. Several sales orders are canceled in response to concerns about recent online reviews of a product. You need to enable the appropriate action message. Which action message should you enable?

• A. Increase
• B. Postpone
• C. Decrease
• D. Derived actions
• E. Advance

You are using the manufacturing execution module in Dynamics 365 Supply Chain Management. License plate labels must be printed for products in the Report as finished step. You need to use the manufacturing execution functionality that meets this requirement. What should you use?

• A. Work templates
• B. Production waves
• C. Operations schedules
• D. Job card device

A company uses Dynamics 365 Supply Chain Management for its rebate management processes. The company must be able to selectively process certain transactions created from the rebate management process during a specific month. The unprocessed transactions will be recreated during the following month by using the Process function. You need to enable the feature that meets the requirement. Which feature should you enable?

• A. Process by dimensions
• B. Include order type journal
• C. Use claim process
• D. Default status
• E. Rebates at invoicing

A paint manufacturer is using Process manufacturing. The manufacturer has a quality error. Batches of paint that use the wrong formula have been marked for rework. The production planner reports they cannot schedule the batch order even though the order has been estimated. You need to add reservations to the items to be used for the rework order. What should you do?

• A. Add co-products that need to be used and then re-estimate
• B. Reset the batch order and delete the formula items. Re-enter the formula items
• C. Reserve the inventory in the formula
• D. Add by-products that need to be used and then re-estimate

A company produces multiple products that require an installation kit that includes 50 components. The company does not want to include these 50 components in every Bill of materials (BOM). You have a BOM kit that includes all 50 components, but you do not want it to produce a separate production order. You need to set up the product BOM for the finished good. What should you do?

• A. Change the coverage group on the kit item to Manual
• B. Select Phantom on the engineering fast tab on the kit item
• C. Change the line type to Pegged supply
• D. Change the line type to Phantom

You are a production manager at a company which produces large batches of coffee and creamers. After a quality inspection, batch 120008 of your cold brew coffee (item number CB-0001) was found to be too acidic and must be reworked. You need to add 20 grams of sugar and stir the product for an additional 0.5 hours. What three actions are required on the rework order? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Manually reserve batch 120008 after estimating the batch order
• B. Add a route operation for 0.5 run time hours of stirring
• C. Add 20 grams of sugar to the production formula
• D. Delete all items from the production formula except for 20 grams of sugar
• E. Delete all route operations except for a half an hour stirring operation

A chemical manufacturing company uses Dynamics 365 Supply Chain Management. A batch of material has a quality issue and must be reworked. You need to create the rework order for production. Which three options must be set? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Pick the reworked inventory after estimation
• B. Specify the batch number on the batch order
• C. Set the batch order as a rework batch
• D. Set the item as a Formula production type
• E. Reserve the reworked inventory after estimation

A manufacturer uses Dynamics 365 Supply Chain Management. The engineering department constantly revises product designs to stay current with the latest technology. The customer service department places orders for the products but frequently adds a prototype product version that is not yet operational. The manufacturer requires a solution that notifies customer service if a prototype version is selected on a sales order. You need to configure the solution. What should you configure?

• A. product release policy
• B. product lifecycle states
• C. version number rule
• D. engineering product category

A manufacturing company uses time and attendance in Dynamics 365 Supply Chain Management. An employee discovers an error after a time and attendance record is approved and transferred. The payroll transfer has not been run. However, the time has been posted against the production order. You need to reverse the transferred registrations. What happens to the production order time posting?

• A. The Production Report as Finished journal is posted
• B. Negative values are offset through manual posting
• C. The production order is ended
• D. Transactions are offset and neutralized

A company uses Process manufacturing for most products and Discrete manufacturing for other products. The company is creating a formula for a new product. The new item will be used to make a name brand product and two generic brand products. This item has the following requirements: Production of the name brand and generic products must use the same formula. The company must produce all three items at the same time. You need to create a produced item that can make two generic items and one main item. How should you set up the item?

• A. Create the name brand item as a Bills of material production type item. Add the two generic items on the Bills of material for the name brand product and use line type phantom
• B. Create the name brand item as a formula planning production of type formula. Create the two generic items as a formula planning production of type formula. Copy the formula from the name brand item into each of the generic items
• C. Create the name brand item as a Bills of material production type item. Create the two generic items as a sub-assembly on the Bills of materials for the name brand product
• D. Create a product as the main product and use a planning item production type. Create the name brand and two generic products as co-products for the planning item

A company uses Dynamics 365 Supply Chain Management. The marketing group needs to be able to view a manufacturer's suggested retail price (MSRP) for a new bill of materials (BOM) item when the cost of the BOM item is calculated. You need to configure the functionality. What should you do?

• A. Set the sales price model field on the calculation group to item sales price
• B. Use the category price rules to generate a trade agreement with the sales price
• C. Add a profit setting percentage to a calculation group
• D. Add a profit setting percentage to the released BOM product
• E. Add a profit setting percentage to a cost group

A company plans an implementation of Dynamics 365 Supply Chain Management. The warehouse manager requires that if an item is picked for production from a bin location that has only a few items left, the picker must pick all remaining items from the location. You need to configure picking to meet the warehouse manager's requirement. Which prerequisite should you configure?

• A. Location directives
• B. Warehouse-enabled products
• C. Cycle counting threshold