Free 2V0-13.24 Sample Questions — VMware Cloud Foundation 5.2 Architect

An architect is working with a customer to design a VMware Cloud Foundation (VCF) solution that is required for a highly secure infrastructure project that must remain separated from all other virtual infrastructure. The customer has already purchased six high density vSAN ready nodes and there is no budget for additional nodes to be added for the expected lifespan of this use case. Assuming capacity is sized correctly, which VCF architecture model and topology should the Architect recommend?

• A. Multiple Instance - Single Availability Zone Standard architecture model
• B. Single Instance - Multiple Availability Zone Standard architecture model
• C. Single Instance - Single Availability Zone Standard architecture model
• D. Single Instance Consolidated architecture model

As part of a new VMware Cloud Foundation (VCF) deployment, a customer is planning to implement vSphere IaaS control plane. What component could be installed and enabled to implement the solution?

• A. Storage DRS
• B. Aria Operations
• C. NSX Edge networking
• D. Aria Automation

During a design discussion, the VMware Cloud Foundation Architect was presented with a requirement to reduce power utilization across all workload domains including management. The architect has suggested to use vSphere Distributed Power Management (DPM) to satisfy this requirement. Which recommendation should the architect provide?

• A. vSphere DPM for Management Workload Domain (only when hosted within a Hyperscaler Data Center)
• B. vSphere DPM for Management Workload Domain (excluding when vSAN is a principal storage)
• C. vSphere DPM for Management Workload Domain (any principal storage)
• D. vSphere DPM for VI Workload Domains (any principal storage)
• E. vSphere DPM for VI Workload Domains (excluding when vSAN is a principal storage)

An architect is evaluating a requirement for a Cloud Management self-service solution to offer its users the ability to migrate their own workloads using VMware vMotion. Which component could the architect include in the solution design that will help satisfy the requirement?

• A. Aria Operations
• B. Aria Automation Orchestrator
• C. Aria Lifecycle Manager
• D. Aria Automation Config

An architect is documenting the design for a new VMware Cloud Foundation (VCF) solution. During workshops with the key stakeholders, the architect discovered that some of the workloads that will be hosted within the Workload Domains will need to be connected to an existing Fibre Channel storage array. How should the architect document this information within the design?

• A. As an assumption
• B. As a design decision
• C. As a business requirement
• D. As a constraint

As part of a VMware Cloud Foundation (VCF) design, an architect is responsible for planning for the migration of existing workloads using HCX to a new VCF environment. Which two prerequisites would the architect require to complete the objective? (Choose two.)

• A. DRS enabled within the VCF instance
• B. Service accounts for the applicable appliances
• C. Active Directory configured as an authentication source
• D. Extended IP spaces for all moving workloads
• E. NSX Federation implemented between the VCF instances

A VMware Cloud Foundation design is focused on IaaS control plane security, where the following requirements are present: Support for Kubernetes Network Policies. Cluster-wide network policy support. Multiple Kubernetes distribution(s) support. What would be the design decision that meets the requirements for VMware Container Networking?

• A. NSX VPCs
• B. Velero Operators
• C. Antrea
• D. Harbor

An architect is planning the deployment of Aria components in a VMware Cloud Foundation environment using SDDC Manager and must plan prepare a logical diagram with networking connections for particular Aria products. Which are two valid Application Virtual Networks for Aria Operations deployment using SDDC Manager? (Choose two.)

• A. Region-A - Overlay backed segment
• B. Region-A - VLAN backed segment
• C. X-Region - VLAN backed segment
• D. X-Region - Overlay backed segment

The following are a set of design decisions related to networking: DD01: Set NSX Distributed Firewall (DFW) to Block all traffic by default. DD02: Use VLANs to separate physical network functions. DD03: Connect the management interface eth0 of each NSX Edge node to VLAN 100. DD04: Deploy 2x 64-port Cisco Nexus 9300 switches for top of rack ESXi host connectivity. Which design decision would an architect include in the logical design?

• A. DD01
• B. DD04
• C. DD03
• D. DD02

During the requirements gathering workshop for a new VMware Cloud Foundation (VCF)-based Private Cloud solution, the customer states that the solution must: Provide sufficient capacity to migrate and run their existing workloads. Provide sufficient initial capacity to support a forecasted resource growth of 30% over the next 3 years. When creating the design document, under which design quality should the architect classify these stated requirements?

• A. Performance
• B. Availability
• C. Manageability
• D. Recoverability

During the requirements gathering workshop for a new VMware Cloud Foundation (VCF)-based Private Cloud solution, the customer states that the solution must: Provide a single interface for the monitoring all components of the solution. Minimize the effort required to maintain the solution to N-1 software versions. When creating the design document, under which design quality should the architect classify these stated requirements?

• A. Manageability
• B. Recoverability
• C. Performance
• D. Availability

A VMware Cloud Foundation multi-AZ (Availability Zone) design mandates that: All management components are centralized. The availability SLA must adhere to no less than 99.99%. What would be the two design decisions that would help satisfy those requirements? (Choose two.)

• A. Configure VMware Live Recovery between the selected AZ(s)
• B. Choose two close proximity AZ(s) and configure a stretched management workload domain
• C. Choose two distant AZ(s) and configure distinct management workload domains
• D. Configure a stretched L2 VLAN for the infrastructure management components between the AZ(s)
• E. Configure a separate VLAN for the infrastructure management components within each AZ

During a requirement gathering workshop, various Business and Technical requirements were collected from the customer. Which requirement would be categorized as a Business Requirement?

• A. The application should be compatible with Windows, macOS, and Linux operating systems
• B. Data should be encrypted using AES-256 encryption
• C. Decrease processing time for service requests by 30%
• D. The system should support 10,000 concurrent users

A company will be expanding their existing VCF environment for a new application. The existing VCF environment currently has a management domain and two separate VI workload domains with different hardware profiles. The new application has the following requirements: The application will use significantly more memory than current workloads today. The application will have a limited number of licenses to run on hosts. Additional VCF and hardware costs has been approved for the application. The application will contain confidential customer information that requires isolation from other workloads. What design recommendations should the administrator document?

• A. Purchase enough matching hardware to accommodate the new applications memory requirements and expand an existing cluster to accommodate the new application. Use host affinity rules to manage the new licensing
• B. Enough identical hardware for the management domain should be ordered to accommodate the new application requirements and a new workload domain should be designed for the application
• C. Deploy a new consolidated VCF instance and deploy the new application into it
• D. new Workload domain with hardware supporting the memory requirements of the new application should be implemented

As part of the requirement gathering phase an architect identified following requirement for the newly deployed SDDC environment: Reduce the network latency between two application virtual machines. To meet that application owner's goal, which design decision should be included in the design?

• A. Configure DRS rule to keep the application virtual machines on the same ESXi hosts
• B. Configure Storage DRS rule to keep the application virtual machines on different datastores
• C. Configure DRS rule to separate the application virtual machines to different ESXi hosts
• D. Configure Storage DRS rule to keep the application virtual machines on the same datastore