Free 2V0-41.24 Sample Questions — VMware NSX 4.X Professional V2

What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

• A. VLAN Uplink
• B. Downlink interface
• C. Loopback Router Port
• D. Service interface

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

• A. net-dvs
• B. esxcfg-nics -l
• C. esxcli network ip interface ipv4 get
• D. esxcfg-vmknic -l
• E. esxcli network nic list

Which troubleshooting step will resolve an error with code 1001 during the configuration of a time-based firewall rule?

• A. Restarting the NTPservice on the ESXi host
• B. Reconfiguring the ESXi host with a local NTP server
• C. Re-installing the NSX VIBs on the ESXi host
• D. Changing the time zone on the ESXi host

Which statement is true about an alarm in a Suppressed state?

• A. An alarm can be suppressed for a specific duration in hours
• B. An alarm can be suppressed for a specific duration in seconds
• C. An alarm can be suppressed for a specific duration in days
• D. An alarm can be suppressed for a specific duration in minutes

Which is an advantage of an L2 VPN in an NSX 4.x environment?

• A. Achieve better performance
• B. Use the same broadcast domain
• C. Enables Multi-Cloud solutions
• D. Enables VM mobility with re-IP

Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

• A. esxcli system syslog config logger set --id=nsxmanager
• B. get support-bundle file vcpnv.tgz
• C. vm-support
• D. set support-bundle file vcpnv.tgz

Which two logical router components span across all transport nodes? (Choose two.)

• A. SERVICE_ROUTER_TIER0
• B. TIER0_DISTRIBUTED_ROUTER
• C. DISTRIBUTED_ROUTER_TIER0
• D. DISTRIBUTED_ROUTER_TIER1
• E. SERVICE_ROUTER_TIER1

An administrator is configuring service insertion for Network Introspection. Which two places can the Network Introspection be configured? (Choose two.)

• A. Edge Node
• B. Host pNIC
• C. Tier-0 gateway
• D. Tier-1 gateway
• E. Partner SVM

Which two statements are true for IPSec VPN? (Choose two.)

• A. IPSec VPN services can be configured at Tier-0 and Tier-1 gateways
• B. Dynamic routing is supported for any IPSec mode in NSX
• C. IPSec VPNs use the DPDK accelerated performance library
• D. VPNs can be configured on the command line interface on the NSX manager

What is the VMware recommended way to deploy a virtual NSX Edge Node?

• A. Through the NSX UI
• B. Through automated or interactive mode using an ISO
• C. Through the vSphere Web Client
• D. Through the OVF command line tool

What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?

• A. MTU should be set to 1700 or greater across the data center network including inter-data center connections
• B. MTU should be set to 1500 or less only on inter-data center connections
• C. Configure Path MTU Discovery and rely on fragmentation
• D. MTU should be set to 1550 or less across the data center network including inter-data center connections

An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host’s physical adapter?

• A. Port Mirroring
• B. Activity Monitoring
• C. IPFIX
• D. Switch Visualization

When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)

• A. Use an IP Pool
• B. Use RADIUS
• C. Use a Static IP List
• D. Use BootP
• E. Use a DHCP Server

Which choice is a valid insertion point for North-South network introspection?

• A. Host Physical NIC
• B. Tier-0 gateway
• C. Guest VM vNIC
• D. Partner SVM

Which two are supported by L2 VPN clients? (Choose two.)

• A. NSX Autonomous Edge
• B. NSX Edge
• C. NSX for vSphere Edge
• D. 3rd party Hardware VPN Device

Which CLI command is used for packet capture on the ESXi Node?

• A. tcpdump
• B. set capture
• C. pktcap-uw
• D. debug

Which command is used to set the NSX Manager’s logging-level to debug mode for troubleshooting?

• A. set service manager log-level debug
• B. set service nsx-manager logging-level debug
• C. set service nsx-manager log-level debug
• D. set service manager logging-level debug

Which is the only supported mode in NSX Global Manager when using Federation?

• A. Proxy
• B. Policy
• C. Controller
• D. Proton

Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

• A. Tier-1 SR Router Port
• B. Tier-0 Uplink interface
• C. Downlink Interface for the Tier-0 DR
• D. Downlink Interface for the Tier-1 DR
• E. Inter-Tier interface on the Tier-0 gateway

What are four NSX built-in role-based access control (RBAC) roles? (Choose four.)

• A. None
• B. Read
• C. Auditor
• D. Full Access
• E. Network Admin
• F. Enterprise Admin
• G. LB Operator