Free 5V0-31.22 Sample Questions — VMware Cloud Foundation Specialist (v2)

During a VCF design workshop, the architect gathered the following customer requirements: There must be two environments: PROD and DEV. PROD and DEV should be administratively separated. PROD will use two different hardware server types, and DEV will only use one hardware server type. The VCF infrastructure design should be flexible and scalable as much as possible. How many NSX local managers in total will be provisioned after deploying the full VCF infrastructure?

• A. 9
• B. 6
• C. 3
• D. 12

An administrator is leveraging existing ESXi hosts to deploy a VMware Cloud Foundation (VCF) environment. What are two of the minimum requirements for this deployment? (Choose two.)

• A. Each host needs to have at least two available NICs
• B. minimum of three VCF ready-nodes are required
• C. Host’s CPU needs to be on the Hardware Compatibility List
• D. Hosts should have a configured Virtual Distributed Switch
• E. Each host needs to have at least one available NIC

A VMware administrator, who works for the U.S defense department, has been asked to upgrade the VMware Cloud Foundation software in a secure location. Due to security concerns, the VCF environment does not have any internet access. The administrator can connect a laptop to the SDDC manager network but is not allowed to carry any storage media into the facility. To complete this work, the administrator has been given access to a network port where the laptop can be connected for internet access. Which steps can the administrator follow to download the latest VCF software bundles?

• A. 1. Download the latest VCF software bundles on the laptop. 2. Copy the bundles to SDDC manager using file sharing
• B. 1. Download all required OVAs onto the laptop. 2. Copy them to a USB drive. 3. Attach the drive to the SDDC manager appliance
• C. 1. Copy the bundle transfer utility from SDDC manager onto the laptop. 2. Use the utility to download the latest software bundles for the upgrade. 3. Copy the bundles to SDDC manager using file sharing
• D. 1. Download the latest bundle transfer utility from myvmware.com. 2. Use the utility to download the latest software bundles for the upgrade. 3. Copy the bundles to SDDC manager using file sharing

An administrator is deploying a new VMware Cloud Foundation workload domain. Which three options are supported for supplemental storage? (Choose three.)

• A. VMFS on iSCSI
• B. SMB
• C. VMFS on FC
• D. vVols
• E. NFS v.3
• F. NFS v.2

What limits can an administrator configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain?

• A. Secrets
• B. Tanzu Kubernetes Cluster worker nodes
• C. Tanzu Kubernetes Cluster master nodes
• D. Persistent Volumes

What do VM Storage Policies match to when using vSphere with Tanzu?

• A. Kubernetes storage classes in the Supervisor Cluster
• B. Kubernetes datastores in a namespace
• C. Kubernetes storage classes in a namespace
• D. Kubernetes datastores in the Supervisor Cluster

An architect needs to create a VMware Cloud Foundation (VCF) VI Workload Domain design with the following requirements: • Design blueprint needs to be repeatable for additional regions • Multiple availability zones • Seven nodes per availability zone to host the workloads • vSAN storage will be used What is the maximum accepted latency supported by vMotion between the two availability zones?

• A. 100 ms
• B. 150 ms
• C. 10 ms
• D. 200 ms

An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation. Which tool should the administrator use for this verification?

• A. Ruby vSphere Console VCF check tool
• B. SDDC Manager GUI restore health tool
• C. vRealize Operation plugin tool for VCF
• D. Support and Serviceability (SoS) tool

An administrator is tasked with preparing hosts for the deployment of a new Workload Domain in a VMware Cloud Foundation environment. The ESXi hosts have HBA cards that require the installation of a separate and the most recent VMware Installation Bundles (VIBs). Which ESXi imaging method should the administrator use?

• A. VMware Imaging Appliance
• B. VMware vSphere Auto Deploy
• C. Download and burn the base ESXi Installer ISO Image to a DVD
• D. VMware vSphere Lifecycle Manager Image

An administrator has registered an external identity source in a consolidated architecture and would like to make sure that any subsequent workload domains can be accessed using the same identity sources. How can this goal be achieved with VMware Cloud Foundation?

• A. By configuring LDAPS as an identity source
• B. By configuring IWA as an identity source
• C. By replicating vSphere SSO configuration
• D. By keeping the pre-configured defaults

Which two tools can be used to create custom ESXi ISO images when preparing for the VMware Cloud Foundation bring-up process? (Choose two.)

• A. vRealize Suite Lifecycle Manager
• B. VMware Imaging Appliance
• C. vSphere Lifecycle Manager
• D. PowerCLI
• E. SSH

VMware vRealize Suite Lifecycle Manager is deployed in VMware Cloud Foundation-aware mode, and the VMware Cloud Foundation version is 4.4 or higher. A new release of VMware vRealize Automation is available with features the automation team requires. What should the VCF administrator consider to upgrade?

• A. Install the version of vRealize Automation that is contained in the VMware Cloud Foundation Bill of Materials
• B. Upgrade all vRealize Suite products managed by vRealize Suite Lifecycle Manager to the same version as vRealize Automation
• C. Upgrade vRealize Automation to the version requested by the automation team
• D. Install a version of vRealize Automation compatible with vRealize Suite Lifecycle Manager in the VMware Cloud Foundation Bill of Materials

A systems administrator is tasked to deploy a management domain as part of the VMware Cloud Foundation Bring-Up process and notes the VCF components which will require at least four vCPUs. Which VCF components have this requirement as default?

• A. NSX-T Manager and SDDC Manager
• B. SDDC Manager and vCenter Server
• C. NSX-Edge Node and NSX-T Manager
• D. vCenter Server and NSX-T Manager

What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?

• A. 1. Add a new vSAN license to the SDDC Manager and vCenter Server. 2. Reassign the vSAN license to the cluster in the vCenter Server. 3. Remove the expired vSAN license from the SDDC Manager and vCenter Server
• B. 1. Add a new vSAN license to the vCenter Server. 2. Connect to SDDC Manager via SSH, and then restart Lifecycle Management using systemctl restart lcm. 3. Verify in the vCenter Server whether a new vSAN license has been assigned to the cluster
• C. 1. Add a new vSAN license to the SDDC Manager. 2. Connect to SDDC Manager via SSH, and then restart Domain Manager using systemctl restart domainmanager. 3. Verify in the SDDC Manager whether a new vSAN license has been assigned to the cluster
• D. 1. Add a new vSAN license to the SDDC Manager. 2. Reassign the vSAN license to the cluster in the SDDC Manager. 3. Remove the expired vSAN license from the SDDC Manager

Which two features are supported when implementing NSX Federation? (Choose two.)

• A. NAT operations
• B. Identity Firewall
• C. DHCP dynamic binding
• D. Load Balancer
• E. DHCP

Which statement accurately describes a Tanzu Spherelet?

• A. Spherelet runs as a VM on the supervisor cluster
• B. The Spherelet runs as an agent on the vCenter server of the Tanzu-enabled VCF workload domain
• C. Spherelet upgrade does not have any impact on the PODs running on the supervisor cluster node
• D. The Spherelet communicates with the control plane’s API server

VCF design workshops were conducted, and the architect collected the following customer requirements for the newly planned VCF infrastructure: The new VCF infrastructure must target two zones: DEV/UAT and DMZ. The security team would like to have full management and network isolation between these two zones. 12 hosts have been ordered for the solution. DEV/UAT workloads must comply with an erasure coding vSAN storage policy with the ability to tolerate the failure of two hosts. Which workload domain sizing will be required to achieve these requirements?

• A. 12-hosts workload domain for both zones, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ cluster
• B. 8-hosts DEV/UAT workload domain, having a 4-hosts DEV cluster, and a 4-hosts UAT cluster, in addition to a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
• C. 8-hosts DEV/UAT workload domain, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
• D. 12-hosts workload domain for both zones, having a 4-hosts DEV cluster, a 4-hosts UAT cluster, and a 4-hosts DMZ cluster

Which type of IP subnets are required when enabling Workload Management in VMware Cloud Foundation?

• A. Non-routable subnets for pod networking and Service IP addresses, routable subnets for ingress and egress
• B. Routable subnets for pod networking, Service IP addresses, ingress and egress
• C. Routable subnets for pod networking and Service IP addresses, non-routable subnets for ingress and egress
• D. Non-routable subnets for pod networking, Service IP addresses, ingress and egress

Which two steps must be performed to create a vSphere with Tanzu namespace? (Choose two.)

• A. Deploy a vSphere Cluster
• B. Enable Harbor Image Registry
• C. Use a DNS-compliant name
• D. Assign permissions
• E. Define resource limits

Which two NSX-T Data Center components are present in VMware Cloud Foundation when Application Virtual Networks (AVNs) are deployed? (Choose two.)

• A. NSX Load Balancer
• B. NSX Global Manager
• C. NSX Intelligence
• D. NSX Edge Cluster
• E. NSX segments